
Essex · Suffolk · Hertfordshire
Asbestos Artex ceiling removal
Swirled, stippled or fan-patterned ceilings from before 2000 may contain asbestos. We test them first, and if it's there, we remove it cleanly with the mess contained.
UKATA-certified
Trained in non-licensed asbestos work
Registered waste carrier
Environment Agency registered
UKAS-accredited testing
Samples analysed by an approved lab
Clear pricing
Free quotes, no surprises
About this service
Don't sand it, don't scrape it
Textured coatings went onto millions of UK ceilings and walls, and some products made before the ban contained a small percentage of white asbestos. The fibres are bound in, so a ceiling you leave alone is usually fine. Sanding, scraping, steaming or drilling is when it becomes a problem.
That's why we always start with a sample. If the lab finds no asbestos, you can get on with redecorating. If it does, and the material can be dealt with under non-licensed rules, we remove it in a controlled way using damp methods and sealed waste bags, then clean the room thoroughly.

What's covered
Textured surfaces we deal with
Lounge & bedroom ceilings
The classic swirl, stipple and fan patterns.
Hallways & stairwells
High ceilings that are awkward and risky to tackle yourself.
Kitchens & bathrooms
Coatings that have been painted over many times.
Textured walls
Some feature walls and chimney breasts got the same finish.
Garages & utility rooms
Older outbuildings and conversions.
Ceiling tiles
Decorative or cement-based tiles we can test and remove.
How it works
A simple, safe process from first call to clear-up
01
Send us the details
Call, message or fill in the form with a few photos and your postcode.
02
Free assessment & quote
We tell you what it is, whether it can be removed under non-licensed rules, and what it will cost.
03
Safe, controlled removal
Material is removed with damp, low-dust methods, then wrapped and labelled on site.
04
Disposal & paperwork
Waste goes to a licensed facility and you receive your Hazardous Waste Consignment Note.
Good to know
Do I have to remove it?
Not always. A sound coating can be left in place and painted over, as long as nobody sands or drills into it. If you're planning a renovation, new lighting or a skim coat, removal is the cleaner route. Or have it tested first so you know exactly what you're dealing with.
Move the slider to see before and after

BeforeAfter
BeforeAfterQuestions answered
Frequently asked questions
How can I tell if my Artex contains asbestos?
You can't tell by looking. Coatings applied before 2000 might, so a sample analysed by an accredited laboratory is the only way to be sure. We can take the sample for you.
Can I just skim over it?
Skimming over a sound coating is a common approach, but any preparation that sands or scrapes it is risky. Get it tested before any work begins.
Will it be messy?
We contain the work area, use damp techniques to keep dust down and clean thoroughly when we finish. The room is left ready for redecoration.
How long will it take?
That depends on the size of the ceiling and the access. We'll give you a realistic timescale with your quote.
Other asbestos jobs we handle
Free photo check
Not sure if it's asbestos? Send us a photo.
Snap a quick photo of the material, such as a garage roof, ceiling, floor tiles, water tank or flue, and send it to us on WhatsApp. We'll tell you if it's likely to need testing and what's involved, with a free, no-obligation quote. No visit needed to get started.
Please don't touch, break or drill the material to get a better picture. A photo from a safe distance is fine.
Free, no-obligation quote
Request my free quote
Tell us what you've found, or send a photo if you're not sure it's asbestos. We'll come back to you promptly with honest advice and a clear price.






